iExplorer Support

My device isn't appearing in iExplorer even though it's plugged in.

Last Updated: Nov 13, 2017 08:23PM CST
The most important thing to check for on this issue is whether your iPhone, Pad or iPod is appearing as connected in iTunes while connected to your PC or Mac with its USB cable. An iTunes connection is required since iExplorer uses the iTunes interface for the data connection. Also, if you have iOS 10 on your iPhone or iPad, you'll also want to make sure you are using iExplorer 4 since the all new major version 4 is required for iOS 10 support. 

If iExplorer is still asking you to connect your iPhone, iPad or iPod when it's already plugged in with its USB cable, you should first make sure that you have iTunes open and that there are no error messages about your device in iTunes. ​
If your device is showing as connected in iTunes without any errors, but not in iExplorer, then you should try completely closing or quitting iExplorer, then reopen it, and see if that helps, or try unplugging & reconnecting your iPhone or iPad and check again.
If you've never used this iPhone or iPad with the Windows PC or Mac you are using, you should make sure that you've chosen to "Trust this computer" on its touchscreen after plugging it in to the computer. iTunes will display the dialogue below when that happens, and once you choose to Continue, your iPhone or iPad screen will ask whether to 'Trust' or 'Don't Trust' the computer. You should tap on 'Trust' in order for it to connect in iTunes and iExplorer:

Also, if you have iOS 10 or 11, make sure you are using iExplorer 4 and not iExplorer 3 since iExplorer 3 only supports up to iOS 9. You also need Windows 7 or later or Mac OS 10.9 or later to be able to connect an iOS 10 device in iTunes on your computer which are the minimum system requirements for iExplorer 4 as well. iOS 11 raised the minimum for Mac OS to 10.10 or later. 

If you have a regular iPod such as a Classic, Nano, or Shuffle, you'll need to check the box to "Enable Disk Use" on the Summary tab for it in iTunes (if it's not already checked) and click on Apply to save the change. 

uses the iTunes interface to connect with a device, so if your iPhone, iPad, or iPod is showing up in iTunes without any errors, it should also be appearing in iExplorer. See below for some of the minimum computer OS requirements for the most recent iOS versions. 

If you are using a Windows PC and are receiving an error about
"Unable to start the iPhone listener process", please click HERE for how to fix it. 

If the above steps didn't help, please try these:

1.) Close iExplorer and iTunes.

2.) Unplug your device from your computer.
3.) Reopen iExplorer 1st and then iTunes 2nd and plug your device back in. 
4.) Wait for your device to appear as connected in iTunes.
5.) Check for it in iExplorer. 

If you can't even get your iPhone, iPad, or iPod to appear in iTunes, you'll need to figure that out first since an iDevice is supposed to connect and appear in iTunes (when connected via USB) as long as your computer's OS meets the minimum system requirements to install a version of iTunes that supports your iOS version. If your computer does have an OS and version of iTunes that is supposed to work with your iOS version,  would first just try restarting of your computer, and if that doesn't help, here is an AppleCare article that has some steps to help get any iPhone, iPad, or iPod to connect in iTunes for Mac and Windows:​

Once you get your iPhone, iPad, or iPod to connect successfully in iTunes, you should then see it appearing in iExplorer too. If not, you should just need to close and reopen iExplorer.

Apple's Minimum Computer OS Requirements for recent iOS Versions

iOS 8:
PC: Windows XP or later
Mac: 10.6.8 or later

iOS 9:
PC: Windows XP or later
Mac: 10.7 or later

iOS 10:
PC: Windows 7 or later
Mac: 10.9.5 or later

iOS 11:
PC: Windows 7 or later
Mac: 10.10 or later

Just make sure you are using the most current version of iTunes that is available for your computer's OS. On a PC, click File menu > Check for Updates. On a PC, click on iTunes menu > Check for Updates. 

iExplorer does not yet support Wi-Fi connections, so you must connect your iPhone, iPad, and iPod with its USB cable, but we plan to add Wi-Fi connection support at some point in the near future. 

Additional Support Information:
Need more assistance? Here are some related support articles:
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found